CHARGER
SRMK.PORTABLE BATTERY CHARGERS P/PH-SERIES |
Traction Battery Charger FT-FS series
Outline
This range of automatic battery charger has been designed for using in a rugged industrial environment for the reaching of recharging of traction batteries used in a wide range of motive vehicles. This range includes forklift trucks, Mining-type Locomotives, Stacker, Pallet Truck, AGV, Floorsweepers, Milk Floats and other on-highway Electric Vehicles.
SEMI-CONSTANT VOLTAGE BATTERY CHARGER
In the initial charging stage, where the electrolyte temperature stays low, the charging current is high. As the charging proceeds, the current automatically decreases at the end of charging where the electrolyte temperature rises.
During the charging cycle, when the battery reaches 80%(Gassing) of charging attained, the timer is actuated. When the preset time is elapsed, the charger switches to the Full position.
|
FEATURE
-
Power supply
For FS-Series 220 V; 1 Phase; 50-60 Hz
(Adjustable to mains 210-220-230-240V)
For FT-Series 380 V; 3 Phases; 50-60 Hz
(Adjustable to mains 360-380-400-420V-440V)
-
Auto start after 3 seconds
-
Equalization cycle 10 min. Charge 50 min pause
-
Safety timer set at 14 hours
-
Final charge timer set at 3 hours
-
Display - Main LED (Power supply); "E" LED
(Charging); 50% LED; 80% LED; FULL LED; EQ LED
|
CALCULATION THE CHARGER
I = Initial charge current
C= Battery capacity in Ah(5-6 Hour rate)
I = C(Ah) 10 Hours charging
6
I = C(Ah) 8 Hours charging
4.5
For Car Battery (20 Hour rate)
I = C(Ah) 10 Hours charging
8
I = C(Ah) 8 Hours charging
6
|
|